How to lower your resin costs with the Rhodi 0 flow

|Mohammed Sohag

To lower your resin costs, you must transition from a DI-only setup to a multi-stage RODI system like the Rhodi 0 Flow. While DI tanks require resin to remove 100% of minerals, the Rhodi 0 Flow’s RO membrane removes 98% of total dissolved solids (TDS) first. This means your resin only "polishes" the remaining 2% of minerals, extending its lifespan by up to 10x. By following the 10 ppm rule and maintaining a consistent 0.5 GPM flow, professional window cleaners can reduce their annual consumable expenses by thousands of dollars.

The Hidden Profit Killer: Resin Consumption

In the window cleaning industry, resin is often your largest recurring expense. If you are using a deionized (DI) tank in an area where the water is over 50 ppm, you aren't just cleaning windows—you are "burning" cash.

Every mineral in your tap water acts like a tiny hammer hitting your resin beads. Once those beads are full, they are useless. The Rhodi 0 Flow was engineered to solve this "Profit Leak" by changing how the water is processed before it ever touches your resin.

Three Ways the Rhodi 0 Flow Slashes Your Overhead

1. The 98% Pre-Filtration Strategy

The Rhodi 0 Flow uses a high-efficiency RO membrane that handles the "heavy lifting."

  • The Math: If your tap water is 200 ppm, a DI tank has to catch all 200 parts. The Rhodi 0 Flow's RO stage drops that number to roughly 4 ppm.
  • The Result: Your resin now only has to work 1/50th as hard. This turns a bag of resin that would have lasted 3 days into a supply that lasts for months.

2. The 10 ppm Rule for Maximum ROI

Many cleaners swap their resin the moment their meter reads 1 ppm. In a professional commercial setting, this is a waste of money.

  • The Rule: You can safely run your Rhodi 0 Flow until the output reaches 10 ppm without risking spots on the glass (especially on the second rinse). This "buffer zone" ensures you get 100% of the value out of every ounce of resin you buy.

3. Non-Proprietary Savings

"Big Brand" systems often force you to buy expensive, pre-packaged resin cartridges. The Rhodi 0 Flow uses standard 10-inch housings.

  • The Benefit: You can buy bulk mixed-bed resin from any supplier and refill the housings yourself. This alone can save you 30–50% compared to buying brand-specific replacement cartridges.

Maintenance That Protects Your Margins

Lowering your resin costs also requires protecting your RO membrane. If the membrane fails, the resin has to do all the work again.

  • Flush After Every Job: Using the bypass valve to flush the "brine" out of the membrane takes 2 minutes and extends the membrane life to 2–5 years.
  • Filter Rotations: Replace your carbon and sediment filters every 2–4 months. A $15 carbon filter is a cheap "insurance policy" for a multi-hundred-dollar RO membrane.

Technical Specs for the Bottom Line

  • The Rhodi 0 Flow is a 50 lb, 49-inch tall industrial tool built for the daily grind. With a steady 0.5 GPM flow rate, you aren't just saving money on resin—you are saving time on the job.
  • Plus, with our Lifetime Warranty, you aren't just buying a filter; you’re securing the future of your business equipment.

The Verdict: Is It Time to Switch?

If you are currently spending more than $100 a month on DI resin, you are in the "Financial Red Zone." The Rhodi 0 Flow pays for itself by turning that $100 expense into a $10 expense.

Stop giving your profits to the resin suppliers. 

Shop the Rhodi 0 Flow and Start Saving

Calculate Your Resin Savings with our Free Tool